Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Warren Distribution, Inc

Company and Product Information

Corporate Office:
Warren Distribution, Inc.
727 South 13th Street
Omaha, Nebraska 68102

Website(s):  www.wd-wpp.com

Warren Distribution was founded in 1922 as Warren Oil Company by James Schlott, the grandfather of Robert N. Schlott, the current Chairman / CEO. The business began by supplying lubricating oils and related products to the agricultural business in the surrounding area. Such business remains the principle focus of the firm today. Today, three quarters of company revenue is from its own manufactured products (including both private label and house branded). Over the years the firm has received a number of performance recognition honors from its business partners including a Sears Partner in Progress Award (2000) and twice a WalMart Vendor of the Year Award (2003 and 2005).

ACCEL Premium ATF

Product: ACCEL
Labeled: Premium ATF "For Use Where DEXRON®-III or MERCON® Fluids Are Specified"

Manufactured By: Warren Distribution, Inc., Omaha, NE

Purchased at: Glenco, KY

Date of purchase: 5/10/2018

 

Website(s):  www.wd-wpp.com

Test Results and Assessment:

The results of the tests conducted on this sample are consistent with their labeled claims.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Flash Point of a DEXRON III/MERCON Fluid in °C (ASTM D92)

The results of the Flash Point test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!
Brookfield Viscosity @-40°C mPa s (cP)

The results of the Brookfield viscosity test conducted on this sample meet the requirements of Dexron III/Mercon.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specifications for flash point and viscosity @ 100°C include only minimum values; the maximum values shown in the “standard” area of the chart are truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard ACCEL
Flash Point in ºC (ASTM D92) 170/177 Min-c 219
Viscosity @ 100ºC, cSt (ASTM D445) 6.8 Min 7.1
Viscosity @40ºC, cSt (ASTM D445)   34.5
Viscosity Index (ASTM D2270) 174
Brookfield Viscosity @-40ºC mPa s (cP) 20,000 Max 14,425
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 66
Magnesium, ppm 1
Phosphorus, ppm   199
Zinc, ppm 31
Molybdenum,  ppm 1
Barium, ppm <1
Boron, ppm 73
Silicon, ppm 2
Potassium, ppm <1
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <1
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm <1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. DEXRON® III, 170°C minimum, MERCON®, 177°C minimum.