The Data Speak for Itself...
Click above for larger image
Click above for larger image
Corporate Office:
Jasper,TX
Website(s): No Websites found for Black Knight Products
The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.
The following are the test results for the sample examined.
Marketed by: Black Knight Products, Jasper, TX
BLACK KNIGHT is a registered trademark of Smitty's Supply, Inc., Roseland, LA
Purchased at: Washington, D.C.
Date of purchase: 7/1/2015
Website(s): No Websites Found For Black Knight Products
CONSUMER ALERT:
The results of the tests conducted on this sample do NOT meet the SAE J300 specifications for the implied Viscosity Grade listed on the product label. The Low-Temperature Cranking Viscosity is 98% higher than the maximum viscosity specification for this SAE grade. In addition, the label on this product states "Recommended for Pre-1988 Gasoline and Diesel Engines Requiring SB/CB Motor Oil". The only gasoline engines requiring SB motor oils are actually pre-1952, and diesel engines requiring CB motor oils are pre-1962. These are obsolete specifications and may cause harm in modern engines. The organometallic additive levels in this sample indicate the product is NOT suitable for use in the majority of automobile engines currently on the road, and the metal analysis results for this sample indicate the product may be contaminated with engine coolant and abrasive material. Furthermore, the viscosity grade is misstated on the labels and should be shown as SAE 5W-30. The labels show 5-30 which has no meaning. Further, as an editorial comment, the last sentence in the warning on the back label, "Oil soiled clothing should," is incomplete.
.
|
Physical Properties |  |
| Elemental Analysis | |
|
| Labeling | |
Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.
| PHYSICAL TESTS (click for test details) - a | Standard | Black Knight |
| TBN, mg KOH/g (ASTM D2896) | 3.99 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 9.3 to <12.5 | 10 |
| Viscosity @40ºC, cSt (ASTM D445) | 64.2 | |
| Viscosity Index (ASTM D2270) | 141 | |
| Viscosity @-30ºC mPa s (cP) (ASTM D5293) | 6,600 Max | 13,090 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium | 1171 | |
| Magnesium | 25 | |
| Phosphorus, ppm | 391 | |
| Zinc, ppm | 384 | |
| Molybdenum, ppm | 38 | |
| Barium, ppm | 0 | |
| Boron, ppm | 58 | |
| Silicon, ppm | 56 | |
| Potassium, ppm | 19 | |
| Manganese, ppm | 0 | |
| Titanium, ppm | 0 | |
| Copper, ppm | 0 | |
| Sodium, ppm | 11 | |
| Vanadium, ppm | 0 | |
| Contaminants | ||
| Silver, ppm | 0 | |
| Aluminum, ppm | 1 | |
| Chromium, ppm | 0 | |
| Iron, ppm | 0 | |
| Nickel, ppm | 0 | |
| Lead, ppm | 0 | |
| Antimony, ppm | 0 | |
| Tin, ppm | 0 | |
|
||