Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Jacksons

Company and Product Information

Corporate Office:
 

Website(s): http://www.jacksonsfoodstores.com 

 

PETROLEUM QUALITY INSTITUTE OF AMERICA TEST PROGRAM

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.

The following are the test results for the sample examined.

Jacksons 5W-30 Motor Oil

Jacksons 5W-30 Motor Oil

Marketed by: Jacksons Food Stores

Purchased at: Sparks, NV

Date of purchase: 3-16-2015

 

Website(s):  http://www.jacksonsfoodstores.com

Test Results and Assessment:

The additive levels in this sample indicate the product may not be suitable for use in the majority of automobile engines currently on the road. The detergent levels are substantially below that typically seen in engine oils meeting current API specifications. In addition, the silicon level is higher than typically expected in a new motor oil; thus indicating possible contamination with abrasives.

This product does not claim compliance with any API specifications and displays no certification marks, making it impossible for consumers to compare to their engine manufacturer's requirements.

 

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard Jacksons
TBN, mg KOH/g (ASTM D2896) 4.12
Viscosity @ 100ºC, cSt (ASTM D445) 9.3 to <12.5 10.0
Viscosity @40ºC, cSt (ASTM D445) 59.2
Viscosity Index (ASTM D2270) 156
Viscosity @-30ºC mPa s (cP) (ASTM D5293) 6,600 Max 6342
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium 1212
Magnesium 22
Phosphorus, ppm 646
Zinc, ppm 738
Molybdenum,  ppm 18
Barium, ppm 0
Boron, ppm 23
Silicon, ppm 12
Potassium, ppm 7
Manganese, ppm 0
Titanium, ppm 0
Copper, ppm 0
Sodium, ppm 11
Vanadium, ppm 0
Contaminants
Silver, ppm
Aluminum, ppm 1
Chromium, ppm 0
Iron, ppm 0
Nickel, ppm 0
Lead, ppm 0
Antimony, ppm 0
Tin, ppm 0
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.