PETROLEUM QUALITY INSTITUTE OF AMERICA The Data Speak for Itself... Home About Us Methodology Contact Us |
||||||
May 25, 2016 SAE 10W-30 Side-by-Side View |
Click Bottles Below for
Data and Assessments |
|||||
SAE 10W-30 TEST RESULTS ACTIVE API SERVICE CATEGORIES |
||||||
Test Results for Passenger Car Motor Oils
CLICK BOTTLES FOR DETAILS |
||||||
Brand | CONOCO | CarQuest | Best Choice | Road-Tech | Formula Shell | |
Listed American Petroleum Institute (API) Service Category | API SN ILSAC GF-5 |
API SN ILSAC GF-5 |
API SN ILSAC GF-5 |
API SN ILSAC GF-5 |
API SN ILSAC GF-5 |
|
PHYSICAL TESTS (click test for details) | Standards(a) |
|||||
TBN, mg KOH/g,(ASTM D2896) | 7.95 | 6.59 | 7.41 | 8.47 | 7.42 | |
Viscosity @ 100ºC, cSt, ASTM D445) for an SAE 10W-30 | 9.3 to <12.5 | 10.42 | 11.02 | 10.16 | 10.36 | 10.38 |
Viscosity @ 40ºC, cSt, (ASTM D445) | 65.15 | 72.55 | 64.56 | 64.26 | 67.78 | |
Viscosity Index (ASTM D2270) | 148 | 141 | 144 | 149 | 140 | |
Viscosity @ -35ºC mPa s (cP) (ASTM D5293) | 7,000 Max | 4,166 | 5,636 | 4,424 | 4,303 | 5,771 |
NOACK Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max (d) | 14.7 | 13.4 | 13.5 | 13.0 | 12.3 |
ELEMENTAL ANALYSIS-b,c | ||||||
Additives | ||||||
Calcium, ppm | 2,302 | 1,559 | 2,009 | 2,374 | 1,905 | |
Magnesium, ppm | 10 | 6 | 11 | 14 | 6 | |
Phosphorus, ppm | 600 to 800 | 744 | 708 | 670 | 742 | 639 |
Zinc, ppm | 798 | 760 | 744 | 823 | 738 | |
Molybdenum, ppm | 16 | <1 | 137 | 43 | 159 | |
Barium, ppm | <1 | <1 | <1 | <1 | 1 | |
Additive and/or other | ||||||
Boron, ppm | 199 | 4 | 94 | 4 | 102 | |
Silicon, ppm | 5 | 3 | 4 | 7 | 4 | |
Potassium, ppm | <5 | <5 | <5 | <5 | <5 | |
Manganese, ppm | <1 | <1 | <1 | <1 | <1 | |
Titanium, ppm | <1 | <1 | <1 | <1 | <1 | |
Copper, ppm | <1 | <1 | <1 | <1 | <1 | |
Sodium, ppm | <5 | 430 | <5 | <5 | <5 | |
Vanadium, ppm | <1 | <1 | <1 | <1 | <1 | |
Contaminants | ||||||
Silver, ppm | <1 | <1 | <1 | <1 | <1 | |
Aluminum, ppm | 2 | <1 | 2 | 1 | 2 | |
Chromium, ppm | <1 | <1 | <1 | <1 | <1 | |
Iron, ppm | <1 | <1 | <1 | <1 | <1 | |
Nickel, ppm | <1 | <1 | <1 | <1 | <1 | |
Lead, ppm | <1 | <1 | <1 | <1 | 1 | |
Antimony, ppm | <1 | <1 | <1 | <1 | <1 | |
Tin, ppm | <1 | <1 | <1 | <1 | <1 | |
a- Standards, shown in black, are established by API, SAE and others. b-Test Method used for metal analysis is ASTM ASTM D5185. c- ASTM D5185-09 Reproducibility by Element. d- This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.
Copyright © 2016 Petroleum Quality Institute of America, LLC. |