The Data Speak for Itself...
Click above for larger image
Click above for larger image
Corporate Office:
Old World Industries, LLC
4065 Commercial Ave
Northbrook, IL 60062-1851
Website(s): www.peakauto.com
Old World Industries, LLC is among the largest privately-held companies competing in the automotive aftermarket. The Northbrook, Illinois-based company enjoys a presence in various consumer product markets in more than 50 countries worldwide. Old World's brands include a full line of PEAK® Automotive Products including Antifreeze Coolant, Motor Oil, Washer Fluid, Electronics and Wiper Blades; BlueDEF® Diesel Exhaust Fluid; Final Charge® Heavy Duty Global Extended Life Coolant; Fleet Charge® Fully Formulated Coolant; and HERCULINER® Truck Bed Liner Kits; For more information, visit www.oldworldind.com.
The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.
The following are the test results for the sample examined.
Distributed by: Old World Industries, LLC in Northbrook, IL
Purchased at: Washington, D.C.
Date of purchase: 7/1/2015
Website(s): www.peakauto.com
The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.
.
|
Physical Properties |  |
| Elemental Analysis | |
|
| Labeling | |
Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.
| PHYSICAL TESTS (click for test details) - a | Standard | Peak |
| TBN, mg KOH/g (ASTM D2896) | 7.2 | |
| Viscosity @ 100ºC, cSt (ASTM D445) | 12.5 to <16.3 | 14.0 |
| Viscosity @40ºC, cSt (ASTM D445) | 92.1 | |
| Viscosity Index (ASTM D2270) | 157 | |
| Viscosity @-25ºC mPa s (cP) (ASTM D5293) | 7,000 Max | 4736 |
| Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) | 15 Max -c | 12.4 |
| ELEMENTAL ANALYSIS (click for test details) - a, b | ||
| Additives | ||
| Calcium | 1756 | |
| Magnesium | 12 | |
| Phosphorus, ppm | 600 Min | 784 |
| Zinc, ppm | 838 | |
| Molybdenum, ppm | <1 | |
| Barium, ppm | <1 | |
| Boron, ppm | 2 | |
| Silicon, ppm | 4 | |
| Potassium, ppm | <5 | |
| Manganese, ppm | <1 | |
| Titanium, ppm | <1 | |
| Copper, ppm | <1 | |
| Sodium, ppm | 450 | |
| Vanadium, ppm | <1 | |
| Contaminants | ||
| Silver, ppm | <1 | |
| Aluminum, ppm | <1 | |
| Chromium, ppm | <1 | |
| Iron, ppm | <1 | |
| Nickel, ppm | <1 | |
| Lead, ppm | <1 | |
| Antimony, ppm | <1 | |
| Tin, ppm | <1 | |
|
||