Home

Product Tested

front label

Click above for larger image

back label

Click above for larger image

Smitty's Supply, Inc.

Company and Product Information

Corporate Office:
Smitty's Supply, Inc.
Roseland, LA

Website(s):www.smittysinc.net 

Smitty's Supply, Inc. manufactures and distributes lubricants and related products. The Company offers antifreeze, brake fluids, chemicals, gear oils, greases, heavy duty engine oils, power steering fluids, and synthetic oils.

PETROLEUM QUALITY INSTITUTE OF AMERICA TEST PROGRAM

The Petroleum Quality Institute of America (PQIA) is an independent resource for information and insights on the quality of lubricants in the marketplace. Our mission is to serve the consumer of lubricants by randomly sampling and independently testing lubricants taken from the field. Test results are posted along with the brand names on the PQIA website. This webpage provides an analysis on the brand detailed below.

The following are the test results for the sample examined.

SuperS SuperSyn
Full Synthetic SAE 0W-20

Product: SuperS SuperSyn Full Synthetic
Viscosity Grade: SAE 0W-20
Labeling: API SN/ILSAC GF-5

Marketed by: Smitty's Supply, Inc., Roseland, LA

Purchased at: Edison, NJ

Date of purchase: 12/28/2015

 

Website(s): www.smittysinc.net

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning

Note: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't.

PHYSICAL TESTS (click for test details) - a Standard SuperS SuperSyn
TBN, mg KOH/g (ASTM D2896) 8.10
Viscosity @ 100ºC, cSt (ASTM D445) 6.9 to <9.3 7.11
Viscosity @40ºC, cSt (ASTM D445) 36.99
Viscosity Index (ASTM D2270) 158
Viscosity @-35ºC mPa s (cP) (ASTM D5293) 6,200 Max 5,006
Volatility, mass % loss, 1 hr, @ 250ºC (ASTM D5800) 15 Max -c 13.2
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium 2,195
Magnesium 13
Phosphorus, ppm 600 to 800 756
Zinc, ppm 813
Molybdenum,  ppm 85
Barium, ppm <1
Boron, ppm 223
Silicon, ppm 4
Potassium, ppm <5
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm <5
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm 2
Chromium, ppm <1
Iron, ppm <1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to two significant figures, therefore results up to 15.5 are considered on specification.