Product Tested

front label

Click above for larger image

back label

Click above for larger image

Tractor Supply Company

Company and Product Information

Corporate Office:
Tractor Supply Company
5401 Virginia Way 
Brentwood, TN 37027

Website(s): www.TractorSupply.com

Tractor Supply Company is the largest operator of rural lifestyle retail stores in the United States. The company operates over 1,600 retail stores in 49 states, employs more than 24,000 team members and is headquartered in Brentwood, Tenn. The company was founded in 1938 as a mail order catalog business offering tractor parts to America's family farmers. Today Tractor Supply is a leading edge retailer with annual revenues of approximately $6.8 billion.

Traveller SAE 15W-40
Premium All Fleet Diesel Engine Oil

Product: Traveller
Viscosity Grade: SAE 15W-40
Labeled: API CK-4, CJ-4, CI-4 PLUS, CI-4, CH-4/SN

Manufactured For: Tractor Supply Company, Brentwood, TN

Purchased at: Monroe Township, NJ

Date of purchase: 6/27/2018

 

Website(s): www.TractorSupply.com

Test Results and Assessment:

The results of the tests conducted on this sample meet the SAE J300 specifications for the SAE Viscosity Grade listed on the product label, and are consistent with the listed API Service Categories.

.

bottle icon Physical Properties pass
Elemental Analysis pass
Labeling warning
Viscosity @ 100°C, cSt (ASTM D445)

The results of the Kinematic Viscosity @ 100ºC test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Cold Cranking Viscosity, mPa s (cP) (ASTM D5293)

The results of the Cold Cranking Viscosity test conducted on this sample meet the requirements of SAE J300.
FusionCharts XT will load here!
Phosphorus, ppm (ASTM D5185)

The results of the Phosporus test conducted on this sample meet the requirements of API CK-4/SN.
FusionCharts XT will load here!

Note1: Although laboratory tests alone cannot be used to establish if engine oil meets an API Service Category, they can be used to determine if it doesn't. Note2: The specification for cold cranking viscosity includes only a maximum value; the minimum value shown in the “standard” area of the chart is truncated for illustrative purposes.

PHYSICAL TESTS (click for test details) - a Standard Traveller
TBN, mg KOH/g (ASTM D2896) 9.74
Viscosity @ 100ºC, cSt (ASTM D445) 12.5 to <16.3 13.2
Viscosity @40ºC, cSt (ASTM D445) 99.4
Viscosity Index (ASTM D2270) 131
Viscosity @-20ºC mPa s (cP) (ASTM D5293) 7,000 Max 5,549
ELEMENTAL ANALYSIS (click for test details) - a, b
Additives
Calcium, ppm 2,337
Magnesium, ppm 12
Phosphorus, ppm 1,200 Max-c 1,070
Zinc, ppm 1,181
Molybdenum,  ppm 101
Barium, ppm <1
Boron, ppm 80
Silicon, ppm 6
Potassium, ppm 2
Manganese, ppm <1
Titanium, ppm <1
Copper, ppm <1
Sodium, ppm 2
Vanadium, ppm <1
Contaminants
Silver, ppm <1
Aluminum, ppm <1
Chromium, ppm <1
Iron, ppm 1
Nickel, ppm <1
Lead, ppm <1
Antimony, ppm <1
Tin, ppm <1
  1. Standards, shown in yellow are established by API, SAE and others.
  2. Test Method for metal analysis is ASTM D5185.
  3. This specification is expressed to one significant figure, therefore results up to 1,249 are considered on specification.